Required Qualification : H.S.L.C. onwards

Certification : State Council of Vocationa Training (SCVT)

Duration of Course : 2 Years ( 4 Semesters )

Syllabus : Electrician Syllabus prepared by NCVT

Introduction :

The course is meant for the candidate who aspires to become Technican in ELECTRICIAN. This course curriculum is revised ansd re-structured to make the First Semester Syllabus common for all the Trades under "POWER SECTOR". The course thus aims at developing a skilled work-force of qualified electrician in India.


At the end of the course the trainee shall be able to

Carry out Installation, Maintenance & Repair works of Electrical AC, DC, machinery, lighting circuits, domestic, appliances and equipments used in domestic and industries
Read and interpret the blue print reading ( Electrical layout Drawing as per BIS specification & standards)
Carry out Domestic and Industrial wiring, Earthing System
Test electrical wiring installation, locate and rectify the faults by using magger and Earth tester
Make and solder the wire joints, wires on PCB and do de-soldering technique
Use of electrical instrument (analog/digital) like Voltmeter, Ammeter, Wattmeter, Energy Meter, Wheatstone Bridge, Oscilloscope, Earth Tester, Tong Tester etc. to measure to different electrical quantities.
Armature writing, single & three phase motor winding and small transformer winding
Operate, maintain and test the switch gears, circuit breakers, relays and transformer
Identify and maintain the Power Generating stations ( conventional and non-conventional ) transmission and distribution system protecting devices
Construct & test semiconductor devices
Practice on using fitting carpentry and sheet metal tools
Carry out break down, overhauling, routine & preventive maintenance of electrical machines and equipments


All State Electricity Boards and Departments
Public Sectors, MNC, Private and Govt. Industries
License Certificate for self employment
Wiring Contractors
Huge job opportunities in power generation, transmission, distribution station
Huge abroad job opportunities


Required Qualification : H.S.L.C. onwards

Certification : State Council of Vocationa Training (SCVT)

Duration of Course : 1 Year ( 2 Semesters )

Syllabus : Diesel Syllabus prepared by NCVT

Introduction :

Mechanic (Diesel) is a diesel-engine mechanical vocational trade. During class teaching, students are told about different aspects of diesel engine and related other activities like maintain diesel equipment operation by completing inspections and preventive maintenance requirements, correcting vehicle deficiencies, making adjustments and alignments, keeping records. Students should aware about common things like maintaining vehicle appearance by cleaning, washing and painting.


After successful copletion of the above course, the trainee shall be able to perform the following skills with proper sequence
Mechanic, Diesel Engine, Oil Engine Fitter repairs services and overhaul diesel or oil engines for efficient performance as prime mover to drive machinery and equipment. Examines engine to locate defects, using various tools and instruments
Dismantles or partly dismantles it to remove damaged or worn out parts and replaces or repairs them
Replace valve and assembles parts, doing supplementary tooling and other functions as necessary to ensure accuracy of fit
Installs assembled or repaired engine in position and connects pulley or wheel to propulsion system. Starts engine, tunes it up and observes performance noting different meter readings such as temperature, fuel level, oil pressure etc. and sets it to specified standard for ptimumperformance.
Checks, adjusts and lubricates engine periodically and performs such other functions to keep engine in good working order.
May solder or braze parts and service diesel fuel pumps and injectors.
Measures essential parts like cylinder, bores piston, sizes crank pins etc. using gauges, micrometer and other precision tools and gets cylinders re-bored, liners fitted, valve seats refaced etc.


On succesful completion of the course the candidates can either get employed, or become a self-employed Enterpreneur an any one of the following fields:
a) Wage Employment
Auto Diesel Engine Mechanic
Diesel Engine Service Technician
Auto Fitter in Manufacturing Concern in Assembly Shop or Test Shop
Mechanic in Auto Manufacturing Industry
Dealers Service Mechanic
Spare Parts Sales Assistant / Manufacturer's Representative
Laboratoty Assistant
b) Self Employment
Automobile Mechanic
Diesel Fuel System Service Mechanic
Vehicle Operator
Spare Parts Salesman
Spare Parts Dealer

TRADE : Fireman

Required Qualification : H.S.L.C. onwards

Certification : State Council of Vocationa Training (SCVT)

Duration of Course : 6 Months

Syllabus : Fireman Syllabus prepared by NCVT

Minimum Physical Requirements

Height : 165 cm

Weight : 52 kg

Chest : Normal 81 cm – Expanded 85 cm

A registered MBBS doctor must certify that the candidate is medically fit to undertake the course

Introduction :

Firemen brave extremely hazardous conditions and long, irregular shifts on a near-daily basis. They are on call at all hours and must respond immediately to extinguish or control fires and to other emergency situations. In addition to a high school diploma, some firemen are required to obtain an EMT certification. All firemen undergo rigorous, on-going training. Certification requirements vary by state and employer.

Skills Required :

Basics of Physics & Chemistry related to Fire: Physical properties of matter, Definition of Density, Relative density, Effects of density on behaviour of gases, Vapour density, Melting & Boiling point, introduction to Heat and Combustion, Measurement of temp and conversion of their scales, Definition of Flammable liquids, gases & vapors, sp heat, latent heat.

Nature of Job :

A fireman is charged with duties ranging from saving lives to keeping firefighting equipment clean. At a moment’s notice, a fireman must be ready to perform job functions such as rescuing people or animals from burning or collapsed buildings, fighting fires and providing emergency medical assistance.

Firemen also work with police, providing general assistance at accident and crime scenes. Firemen who aid in controlling and extinguishing forest fires sometimes parachute into areas vehicles can’t reach and assist in creating and maintaining fire lines. Other common duties include:

Carrying hoses
Climbing ladders
Hooking hoses up to hydrants
Breaking through walls
Protecting those in danger due to a fire
Ensuring integrity of the property ablaze

Course Content :

Physical training
Unarmed drill (Parade)
Fire safety
Fire Science
Fire prevention
Fire protection
Fire service operation
Fire service administration
First aid

Job Prospects :

The demand for fire fighters is expected to grow by an incredible 19% from 2010 through 2014, which is substantially faster than the average for all occupations nationwide. Most new firefighter recruits will come from volunteer firefighters who are converted to paid positions. Over the last few years, it has become increasing difficult for volunteer fire departments to recruit and retain volunteer firefighters. Furthermore, a trend toward families and individuals living in and around major metropolitan areas has increased the demand for fire fighters. Notwithstanding growing demand, firefighters are expected to face a lot of competition of paid job openings. The number of qualified applicants in most areas where firefighters are needed far exceeds the number of full and part-time job openings. This situation is expected to persist in the foreseeable future. Applicants who are physically fit, score high on mechanical aptitude exams and possess an advanced degree in fire science or fire management have the best chances of filling open job positions.

Employers :

Can work as Fireman in Government or Private agencies providing rescue work in case of fire.

Higher Studies :

B.Sc. (Fire & Safety)
Certificate In Fireman (ITI)
Safety & Protection (ITI)
B.Sc. (Hons) Fire and Leadership Studies
B.Sc. (Hons) Fire and Rescue


LMV Motor Driving Training
MMV Motor Driving Training
HMV Motor Driving Training

Fee Structure Of the Courses/Trades Offered

Course Title Admission Fee Monthly Fee Duration Qualification
Electrician (SCVT) 20,000/- 2000/- 2 Years HSLC onwards
Diesel (SCVT) 20,000/- 2000/- 1 Year HSLC onwards
Fireman (SCVT) 20,000/- 2000/- 6 Months HSLC onwards

Contact Us


Garmur, Jorhat, Assam

Phone Number

+91 9854055496

Your message has been sent. Thank you!

© 2019 Trade & Technology. All rights reserved | Powered by XTM Technologies